Skip to content
Battery Plant / Process explorer / Mead, Oklahoma

FROM CELL.
TO SYSTEM.

Discover the care behind a battery system. Explore Z1’s planned 5 kWh assembly process—from traceable cells and precision connections to testing and quality review.

51.2 V100 AhZ1P-WM-5K product reference
Our manufacturing vision / proposed layout

A place for
every step.

30,000sq ft total150 × 200ft footprint32ft building height4H2 Plus robots

Dedicated Battery and Inverter areas form the heart of our planned Mead facility. Each has its own component flow, assembly stations, testing and quality release, supported by a shared engineering and customer-facing office area.

Proposed 150 by 200 foot Battery and Inverter Plant floor planFront offices occupy 4,500 square feet. A central material aisle separates dedicated Inverter and Battery areas. Select any zone for its intended use. Four H2 support bays are outside the guarded precision cells. Entrances and dock positions are assumptions.150 ft200 ft Reception900 sq ftOffices900 sq ftEngineering900 sq ftMeeting / QA900 sq ftStaff / services900 sq ftInverter receiving1,624 sq ftInverter assembly2,784 sq ftInverter test1,740 sq ftInverter dispatch1,624 sq ftBattery receiving1,624 sq ftCell screening1,276 sq ftStack / connect1,624 sq ftCabinet / BMS1,276 sq ftBattery test728 sq ftBattery dispatch728 sq ft 12 ft material spine / proposed H2-01H2-02H2-03H2-04FRONT / OFFICE ENTRANCE ASSUMEDREAR / DISPATCH SIDE ASSUMEDSCHEMATIC IN FEET / NO MEZZANINE
OfficesAssembly / testingInverter areaBattery materialsH2 support bay
Discover each production area.
office / gross zone allowance

Reception

30 × 30 ft · 900 sq ft

A proposed welcome space for visitors, product conversations and controlled entry to the production areas.

office / gross zone allowance

Offices

30 × 30 ft · 900 sq ft

A shared office area supporting customer relationships, administration and plant coordination.

office / gross zone allowance

Engineering

30 × 30 ft · 900 sq ft

A dedicated workspace for product engineering and production planning, close to both plant areas.

office / gross zone allowance

Meeting / QA

30 × 30 ft · 900 sq ft

A shared space for project discussions, technical reviews and quality documentation.

office / gross zone allowance

Staff / services

30 × 30 ft · 900 sq ft

Staff facilities and building services supporting the people behind the production process.

inverter / gross zone allowance

Inverter receiving

58 × 28 ft · 1,624 sq ft

Dedicated inverter component receiving, inventory and incoming inspection, separate from battery materials.

inverter / gross zone allowance

Inverter assembly

58 × 48 ft · 2,784 sq ft

The proposed inverter assembly area brings electronics, power-stage integration, controlled fastening and firmware checks together.

inverter / gross zone allowance

Inverter test

58 × 30 ft · 1,740 sq ft

A dedicated inverter testing area with product-specific electrical and functional checks.

inverter / gross zone allowance

Inverter dispatch

58 × 28 ft · 1,624 sq ft

Inverter quality review, packing and finished-goods staging, with a separate product history.

logistics / gross zone allowance

Battery receiving

58 × 28 ft · 1,624 sq ft

Battery materials begin their journey here, with supplier identity, incoming inspection and controlled storage.

line / gross zone allowance

Cell screening

58 × 22 ft · 1,276 sq ft

Calibrated cell screening and compatible build-set preparation before battery assembly.

line / gross zone allowance

Stack / connect

58 × 28 ft · 1,624 sq ft

Precision cell placement, mechanical support and product-specific connection checks form the core of the planned assembly area.

line / gross zone allowance

Cabinet / BMS

58 × 22 ft · 1,276 sq ft

The battery enclosure, management electronics and harness come together before inspection and closure.

test / gross zone allowance

Battery test

26 × 28 ft · 728 sq ft

Dedicated battery electrical testing and monitored cycling support a documented quality review.

logistics / gross zone allowance

Battery dispatch

26 × 28 ft · 728 sq ft

Battery quality release, label verification and supported packing complete the planned production flow.

4,500 sq ft offices + 25,500 sq ft factory

A proposed balance of customer, engineering and production space. Areas include circulation and are shown as a concept layout.

Our proposed shared building keeps Battery and Inverter production physically separate, with dedicated materials, testing and quality review for each program. This schematic illustrates our manufacturing vision; final layout and equipment are subject to engineering and commissioning.

H2-01

Battery receiving

Planned support for empty trays and light material kits near battery receiving.

H2-02

Battery components

Planned staging of lightweight assembly kits at dedicated battery handoff areas.

H2-03

Inverter supplies

Planned support for lightweight component kits near inverter assembly.

H2-04

Inverter packing

Planned staging of labels and accessory trays near inverter packing.

OUR PLANNED ASSEMBLY PROCESS

AI-generated process visualization. Equipment, cell layout and robot tasks are proposed; this is not footage of an operating Z1 factory. Chapter time is film time, not production cycle time.

THE MATERIAL PATH12 QUALITY GATES
Quality before releaseThe planned process holds any product that does not meet its acceptance criteria for review and reinspection before release.
01 / 12

Receive & identify

Our planned battery assembly begins with finished supplier cells. The receiving process links their identity and supplier lot to the production record.

Quality focus
Cell identity, supplier documentation and visible condition.
Traceability
Supplier lot and incoming inspection history.
Why it matters
A clear origin for the components inside each system.
02 / 12

Screen the cells

Cell screening is designed to assess electrical condition before assembly, using calibrated equipment and product-specific acceptance criteria.

Quality focus
Voltage, resistance and the required inspection results.
Traceability
Screening results and equipment calibration references.
Why it matters
Early checks help keep unsuitable cells out of an assembly.
03 / 12

Match a build set

Compatible cells are allocated to a battery build, creating a link between individual components and the finished system.

Quality focus
Cell compatibility, count, chemistry and orientation.
Traceability
Cell identities linked to the planned battery serial number.
Why it matters
A documented component history for each battery.
04 / 12

Prepare insulation

Dielectric barriers and support components form part of the battery’s internal protection. The planned process checks their placement before the next assembly step.

Quality focus
Insulation condition, correct parts and placement.
Traceability
Design revision and inspection evidence.
Why it matters
Attention to the details that separate and protect internal components.
05 / 12

Locate & restrain

Dedicated fixtures support precise cell placement and restraint within the assembly. The final arrangement will follow product-specific design requirements.

Quality focus
Cell orientation, alignment and mechanical support.
Traceability
Assembly revision and component orientation checks.
Why it matters
Repeatable positioning throughout the build.
06 / 12

Make the connections

Cell connections bring the assembly together electrically. Our planned approach pairs product-specific joining methods with documented connection checks.

Quality focus
Polarity and connection quality against product-specific design requirements.
Traceability
Joining process revision and inspection results.
Why it matters
Verified connections at a critical point in the battery build.
07 / 12

Integrate the enclosure

The supported battery assembly is integrated with its cabinet, with attention to retention, insulation and cable routing.

Quality focus
Mechanical fit, clearances and protected routing.
Traceability
Enclosure and component lot history.
Why it matters
A coordinated mechanical and electrical assembly.
08 / 12

Install BMS & harness

The battery management system, sensors and protection components connect the cells to the system’s monitoring functions.

Quality focus
Harness mapping, connectors and firmware revision.
Traceability
BMS identity, firmware and harness inspection.
Why it matters
A documented check of the battery’s monitoring and protection components.
09 / 12

Inspect & close

Inspection before closure checks the internal assembly, cable routing and covers. Additional enclosure checks depend on the product specification.

Quality focus
Routing, barriers, closure and applicable enclosure checks.
Traceability
Closure inspection and any required enclosure test results.
Why it matters
A final review of the assembly before electrical testing.
10 / 12

End-of-line checks

A dedicated test station is planned for the required electrical and functional checks, including battery management signals and communications.

Quality focus
Electrical and functional results against product acceptance criteria.
Traceability
Battery test report and calibrated equipment references.
Why it matters
Documented verification before quality review.
11 / 12

Cycle & observe

The proposed test flow includes controlled charge and discharge observation, with temperature and battery management behavior reviewed against the product test plan.

Quality focus
Performance and observation criteria for the battery system.
Traceability
Cycling results and thermal observations.
Why it matters
An additional view of system behavior beyond assembly inspection.
12 / 12

Release & dispatch

Quality review brings component history, inspection evidence and test results together before labeling, packing and dispatch.

Quality focus
Complete inspection records and authorized quality release.
Traceability
Final battery serial number and release documentation.
Why it matters
A connected production history behind the finished system.
Precision with purpose

RIGHT TASK.
RIGHT MACHINE.

01 / HUMANOID ASSIST

H2 Plus

Four H2 Plus robots are part of our proposed support team: two for each plant. Their planned roles center on light component kits, trays and assisted material staging.

02 / PRECISION & LOAD

Fixed arms & fixtures

Our planned precision stations combine fixed arms, dedicated fixtures and controlled tools for repeatable placement and fastening. The film illustrates the approach; final equipment is still being engineered.

03 / PROCESS AUTHORITY

Engineering & quality

Engineering, production and quality teams remain central to our approach. Automation supports repeatability, while documented inspections and quality review guide product release.

A vision for
consistent quality.

  • Our product reference is the Z1Power 5 kWh wall-mounted battery: 51.2 V, 100 Ah and lithium iron phosphate (LiFePO₄) chemistry.
  • The planned assembly flow starts with finished supplier cells and brings them together with the enclosure, battery management system and protection components.
  • Component identity, connection checks and electrical testing form the core of the proposed quality approach.
  • Battery and Inverter programs have dedicated production and test areas within the same proposed facility.

The facility and automation shown here are a planning concept, not a commissioned production line. This visualization does not establish product certification or measured manufacturing performance.

Research references / reviewed 10/02/2026

Engineering behind
the picture.

RWTH Aachen PEM / VDMABattery Module and Pack Assembly ProcessUniversity-authored module and pack sequence; adapted here for a stationary LFP planning concept.Fraunhofer ISECell Connection Technologies for Battery ModulesJoint design, process monitoring and nondestructive evaluation.Batteries journalWelding Challenges and Quality Assurance in EV Battery Pack ManufacturingResearch review of joining options and quality challenges; EV methods are not automatically applicable to this pack.Fraunhofer ISEBattery Engineering, Production and TestingElectrical, optical, mechanical and acoustic battery characterization.Unitree RoboticsH2 Plus official specificationsPublished robot capability and configuration limitations.OSHAIndustrial Robot Systems and Industrial Robot System SafetyApplication risk assessment, tooling, safeguarding and validation.Z1Power5 kWh Wall-Mounted BatteryProduct reference: Z1P-WM-5K, 51.2 V, 100 Ah and LFP chemistry.
Explore the 5 kWh battery ↗Our manufacturing programs ↗